Nortel VPN Router 1750 Installation Manual page 23

For information about the connectors and cable pinouts, see
"Technical specifications," on page
"Rear view of the Nortel VPN Router 1750" on page 23
VPN Router 1750. All interface cables and the power cord attach to the rear of the
gateway.
Figure 1 Rear view of the Nortel VPN Router 1750
VPN Router 1750
100 - 240 V~
5 - 3 A
60 - 50 Hz
AC Power
receptacle
Connect the interface cables to the VPN Router 1750 in the following order:
1 Connect the 10/100BASE-TX RJ-45 cables to the built-in 10/100BASE-TX
Ethernet LAN ports on the gateway.
2
If you plan to connect a terminal or PC to the gateway, connect the serial cable
that ships with the VPN Router 1750 to the serial port.
3 Connect all other cables to the ports on the installed interface cards.
If you ordered optional interface cards, connect the cables for these interfaces
to the ports.
Get other manuals https://www.bkmanuals.com
69.
Power
Serial Port
Serial port
switch Ethernet
LAN ports
Nortel VPN Router Installation — VPN Router 1750
Chapter 1 Cables and power 23
Appendix A,
shows the back of the
4 PCI slots
LAN0 LAN1
1 2 3 4
10/100
11424EA