Additional Equipment; Site Requirements - Nortel VPN Router 1750 Installation Manual

40 Chapter 2 Nortel VPN Router 1750 chassis

Additional equipment

You need items that do not ship in the VPN Router 1750 shipping container.
Before you begin the installation, ensure that you have all the cables, tools, and
other equipment that you need.
Cables
You need cables that do not ship in the VPN Router 1750 shipping container. For
more information about which cables ship and which ones you can order, see
"Connecting communications cables" on page
cables, contact your network administrator.
Hardware to mount the chassis in an equipment rack
To install the VPN Router 1750 in an equipment rack, you need a Phillips
screwdriver and an equipment rack that meets the following specifications:
• heavy-duty steel construction
• width of 19 in. (48.26 cm) and depth of 24 in. (60.96 cm)
• Electronic Industries Association (EIA) standard hole-spacing
If the rack does not have threaded rail holes, you must use the cage nuts that ship
with the VPN Router 1750.

Site requirements

The installation site must provide sufficient free space around the VPN Router
1750 to ensure proper ventilation and service access. For information about the
physical, electrical, and environmental requirements for the VPN Router 1750,
see Appendix A, "Technical specifications," on page
NN46110-316 03.01
Get other manuals https://www.bkmanuals.com
22. If you do not have the proper
69.