Nortel VPN Router 1750 Installation Manual page 43

1
Attach a cage nut in four locations at the front of the rack, if the holes in the
vertical supports of the rack are not threaded.
2
Position the rack-mount shelf inside the rack as shown in the following
graphic.
Rack edge
Flange
3 Align the holes in the shelf with holes in the front of the rack.
4 Snap the support flange into place. Ensure that the alignment pin above the
flange fits into the appropriate hole.
5
Insert one of the supplied panhead screws through the top hole on each side of
the shelf into the hole in the rack, and tighten the screws.
Get other manuals https://www.bkmanuals.com
Chapter 2 Nortel VPN Router 1750 chassis 43
Rail
without
threaded
holes
Cage nut
CS260003A
Nortel VPN Router Installation — VPN Router 1750
CS260003A