Configure The Network - Canon Colorado 1630 Operation Manual

Configure the network

Configure the network
Introduction
At installation, the printer is connected to the network and connectivity settings are made.
If necessary, you can change the network configuration settings on the user panel.
Network overview
Action
The printer receives jobs from the RIP worksta-
tion
The printer connects via the internet with the
back office
The printer connects to the mail server for
password recovery and to inform the adminis-
trator of security updates and new software
versions.
You can access the settings editor
Procedure
1. On the operator panel, tap on the [System] icon on the right.
2. Tap on [Connectivity ].
3. Tap on [Identification and network adapter]. You can change the [Hostname], [Adapter link speed
and duplex mode] or [Primary DNS suffix].
NOTE
You have to log in as System administrator to change the settings. For more
information, see
268 Chapter 8 - Configure the network and security settings
Log in as a System administrator on page
Connection via
RAW TCP/IP (port 9100)
HTTPS (port 443)
SMTP (port 25 by default, can be changed)
HTTP (port 80) or HTTPS (port 443 by default,
can be changed)
NOTE
HTTPS requires a valid certificate.
271.