Load a take-up roll core onto the roll winder
2. Push the green levers on both sides of the take-up media shaft. Remove the take-up media shaft
from the winder.
3. Pull the handle of the locking mechanism inside the core towards you. Take the empty media roll
core and slide it on the media shaft.
You can use optional grip lock to insert the media shaft into the core of the new media roll:
1. Pull the handle of the locking mechanism inside the core towards you.
2. Place the grip lock in the feed media shaft.
3. Take the empty media roll core and slide it onto the media shaft.
116
Chapter 4 - Handle the media