Clean The Ink Unit - Canon Colorado 1630 Operation Manual

Clean the ink unit

Introduction
It is advised to clean the ink unit regularly to keep the printer in the best condition. You can clean
the ink unit when you replace a bottle or during periodic maintenance. When you see ink
pollution, immediately clean the affected area. This is explained in the video Clean the ink unit,
here
click to view.
Before you begin
Use Colorado 1630 prescribed:
• Microflex gloves for handling ink
• Lint free cloths
• Cleaning liquid (IPA)
NOTE
For information on the prescribed maintenance materials, see
maintenance materials on page
CAUTION
Wear the prescribed gloves when contact with ink or maintenance materials is possible. Gloves
should always overlap sleeves. Follow the Safety Data Sheets (SDS) guidelines carefully in
order to ensure maximum safety.
IMPORTANT
Use the prescribed cleaning liquid. Do not use any other cleaners.
Procedure
1. Go to the side of the printer where the ink bottles are located.
2. Put on the Colorado 1630 approved gloves.
3. Move down the green handle which is located left of the bottle you want to replace.
Do not hold the bottle while you move the handle.
255.
Clean the ink unit
List of Colorado 1630
Chapter 6 - Maintain the system 251