Connecting Through A Print Server; Protocols; Using Netpilot To Configure Your Network Adapter - Canon Laser Shot LBP-1110 User Manual

Canon laser beam printer user's guide
Table of Contents

Advertisement

Connecting Through A Print Server

Using a print server, you can control print jobs (for example, change
printing order, cancel jobs, etc.) centrally.
When multiple jobs compete, they print in the order in which the jobs are
entered.
The print monitor for the network adapter needs to be installed only on
the printer server. It is not necessary to install it on each of the clients.
You can install the printer from the server unless you are using a
Windows 95/98/Me server and a Windows NT 4.0/2000/XP client.

Protocols

The network print monitor uses NetBEUI or TCP/IP to communicate with
the printer.
Windows XP supports only the TCP/IP protocol.
Using NetPilot To Configure Your Network Adapter
1.
Install NetPilot and the Print Monitor.
2.
Start NetPilot.
3.
Select the network adapter from the displayed list.
4.
Enter the network adapter settings.
NetPilot runs on Windows 95/98/Me and Windows NT 4.0/2000.
Installing the Network Print Monitor
1.
Connect the network adapter to the network.
2.
Install the network print monitor. The installation automatically uses an
available port. For more information, see the network adapter manual.
When the optional network adapter is connected to your printer, the
NetSpot utility can be used. The NetSpot utility provides easy network
management of your printers by allowing you to set up the printers and
display their printer status and features.
Appendix B
155
Network Adapter

Advertisement

Table of Contents
loading

Table of Contents