Choose A Media Category - Canon Colorado 1630 Operation Manual

Choose a media category

Introduction
You can choose a media category when you copy or change a media profile in the RIP.
When to do
Only when you create a new media profile or edit an existing media profile you can change the
media category. It is advised to use the Colorado 1630 media profiles and not change the media
category. Only advanced users or application specialists should edit media profiles and have to
choose the media category.
NOTE
This manual provides you with basic information in order to create and change media profiles.
Profiling is an expert task which requires additional information and tools not covered by this
manual. Contact your local support organization when you want to create or change media
profiles.
Before you begin
The location of the media category setting differs, depending on the RIP you are using. For more
information, see
on page 53.
Media categories
Use the information on the sticker of the media box, to choose the right media category. When it
is difficult to decide, use the overview to choose the correct category.
Media category
Paper
Light paper < 120 gsm (32
lb bond)
Heavy paper > 200 gsm (54
lb bond)
Manage media profiles in ONYX on page
Characteristics
• Can be torn by hand
• Is humid sensitive: will deform permanently after exposure to
water
• Can be torn by hand
• Is humid sensitive: will deform permanently after exposure to
water
• Can be torn by hand
• Is humid sensitive: will deform permanently after exposure to
water
42,
NOTE
The following exceptions are classified under this media
category: textile wallcovering, wallcovering (solid vinyl
with non-woven backing), wallcovering (solid vinyl and
blown vinyl with paper backing), wallcovering (solid vi-
nyl with textile backing), wallcovering (non-woven glass-
fiber), wallcovering (Woodchip - Raufaser).
Choose a media category
Manage media profiles in Caldera
Chapter 4 - Handle the media
4
65