About this task
The following image(s) indicate the location of the system-board shield and provides a visual representation of the installation
procedure.
Steps
1. Place the system-board shield on the display-assembly base.
2. Align the screw holes on the system-board shield with the screw holes on the display-assembly base.
3. Replace the six screws (M3x5) that secure the system-board shield to the display-assembly base.
Next steps
1. Install the
back
cover.
2. Install the stand.
3. Follow the procedure in
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in
2. Remove the stand.
After working inside your
Before working inside your
Removal and installation procedures for High Performance processors
computer.
computer.
51