Steps
1. Place the heat sink on the system board and the display-assembly base.
2. Align the screws on the heatsink with the screw holes on system board and the display-assembly base.
3. In sequential order (1>2>3>4>5) tighten the five captive screws that secure the heat sink to the system board and
display-assembly base.
Next steps
1. Install the
system-board
2. Install the
back
cover.
3. Install the stand.
4. Follow the procedure in
Processor
Removing the processor
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
system-board
5. Remove the
heat
sink.
shield.
After working inside your
Before working inside your
shield.
Removal and installation procedures for Energy Efficient processors
computer.
computer.
137