Power-supply unit
Removing the power-supply unit
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
system-board
5. Remove the
I/O
cover.
About this task
The following image(s) indicate the location of the power-supply unit and provides a visual representation of the removal
procedure.
Steps
1. Press and hold the securing clip and disconnect the processor-power cable (ATX CPU) from the system board.
2. Disconnect the control-signal cable (CTRL) from the system board.
74
Removal and installation procedures for High Performance processors
Before working inside your
shield.
computer.