3. Connect the speaker cable (INT SPKR) to the audio board.
Next steps
1. Install the
bottom
cover.
2. Install the
I/O
cover.
3. Install the
system-board
4. Install the
back
cover.
5. Install the stand.
6. Follow the procedure in
Heat sink
Removing the heat sink
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
system-board
About this task
NOTE:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you
touch it.
NOTE:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin
can reduce the heat transfer capability of the thermal grease.
The following image(s) indicate the location of the heat sink and provides a visual representation of the removal procedure.
shield.
After working inside your
Before working inside your
shield.
Removal and installation procedures for Energy Efficient processors
computer.
computer.
135