Dell W32C Owner's Manual page 122

About this task
The following image(s) indicate the location of the hard drive and provides a visual representation of the installation procedure.
Steps
1. Place the hard-drive bracket on the hard drive.
2. Align the screw holes on the hard drive with the screw holes on the hard-drive bracket.
3. Replace the four screws (M3x3.5) that secure the hard-drive bracket to the hard drive.
4. Slide the hard-drive assembly into the hard-drive slot on the display-assembly base.
5. Replace the screw (M3x5) that secures the hard-drive assembly to the display-assembly base.
6. Connect the hard-drive cable to the hard drive.
Next steps
1. Install the back cover.
122 Removal and installation procedures for Energy Efficient processors