• Wired LAN
Network
• AMX Device Discovery: When this function is On, the projector can
Settings
• MAC Address (Wired): Displays the mac address for this projector.
Returns all settings to the factory preset values.
Factory Default
Returns all of the adjustments you've made for the System menu to the
Reset System
factory preset values.
Information
• Native Resolution: Shows the native resolution of the projector.
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Light Source Mode: Shows the selected mode in the Light Settings
Information
• 3D Format: Shows the current 3D mode.
• Color System: Shows input system format.
• Light Usage Time: Shows the number of hours the light source has
• Firmware Version: Shows the firmware version of your projector.
• Service Code: Shows the projector serial number.
be detected by AMX controller.
The following settings will still remain: Keystone, Projector Installation, Light
Usage Time, High Altitude Mode, Security Settings, Baud Rate, HDMI
Equalizer, Digital Shrink & Shift, Filter Usage Time.
menu.
been used.
Menu operation
49