Table of Contents
Advertisement
Right/
)
8.
Increases the projector volume.
When the On-Screen Display (OSD) menu
is activated, the #2, #3, #5, and #8 keys
are used as directional arrows to select
the desired menu items and to make
adjustments. See
"Using the menus" on
page 29
for details.
9. OK
Confirms the selected On-Screen Display
(OSD) menu item.
10. MENU
Turns on the On-Screen Display (OSD)
menu. See
"Using the menus" on page 29
for details.
11. Light source indicator light
Indicates the status of the light source.
Lights up or flashes when the light source
has developed a problem. See
on page 51
for details.
12. TEMPerature indicator light
Lights up red if the projector's temperature
becomes too high. See
page 51
for details.
13. Source selection buttons
(COMPUTER, VIDEO, S-Video,
HDMI 1/2)
Selects an input source for display.
14. AUTO
Automatically determines the best picture
timings for the displayed image. See
adjusting the image" on page 26
details.
15. MUTE
Toggles projector audio between on and
off.
16. LIGHT MODE
Press to display OSD menu to select
desired light mode.
17. PIC MODE
Press to display OSD menu to select Picture
mode. See
"Picture Mode" on page 40
details.
18. ASPECT
19. ZOOM+/ZOOM-
20. CONTRAST
21. FREEZE
22. TEST PATTERN
23. QUICK INSTALL
24. KEYSTON
"Indicators"
25. INFO
"Indicators" on
26. BRIGHTNESS+/BRIGHTNESS-
27. MIC/VOL +/MIC/VOL -
28. 3D
29. ECO BLANK
"Auto-
for
30. NETWORK SETTING
for
Selects the display aspect ratio.
Magnifies or reduces the projected picture
size.
Displays the CONTRAST setting bar.
Freezes the projected image. See
Pattern" on page 46.
Displays the test pattern.
Quickly selects several functions to adjust
the projected image and displays the test
pattern.
Display the 2D Keystone page.
Displays the projector information.
Displays the BRIGHTNESS setting bar.
Microphone input level adjustment.
Press to display 3D setup menu.
Used to hide the screen picture.
Do not block the projection lens from projecting
as this could cause the blocking object to become
heated and deformed or even cause a fire.
Displays the Network Settings OSD
menu.
"Test
Introduction
13
Advertisement
Table of Contents
