Positioning your projector
Using the Quick Install
The projector provides a hot key to set Projector Position, Test Pattern, 2D Keystone,
Corner Fit and Digital Shrink & Shift quickly.
Press Quick Install on the remote control and press
/
to select:
• Projector Position: See
"Positioning your projector" on page
15.
• Test Pattern:
See"Test Pattern" on page 46
• 2D Keystone: See
"Correcting 2D Keystone" on page
27.
• Corner Fit: See
"Correcting Corner Fit" on page
28.
• Digital Shrink & Shift: See
"Digital Shrink & Shift" on page
47.
Choosing a location
Your projector is designed to be installed in one of four possible installation locations:
Front Wall
Rear Table
Front Table
Rear Wall
Use the test pattern
Positioning your projector
15