Table of Contents
Advertisement
System
Language
Background
Settings
Menu Settings
Light Source
Information
Standby Settings
Operation
Settings
Security Settings
Menu operation
48
Sets the language for the On-Screen Display (OSD) menus.
• Background: Sets the background color for the projector.
• Splash Screen: Allows you to select which logo screen will be displayed
during projector start-up.
• Menu Type: Switches to the Basic OSD menu.
• Menu Display Time: Sets the length of time the OSD will remain active
after your last key press.
Shows the current light mode.
• Standby Mode
• ECO: The projector maintains at normal standby mode with less than
0.5W power consumption.
• Network: The projector maintains at network standby mode with less
than 2W power consumption.
• Normal: Allows the projector to provide network, monitor out and
audio pass through functions in standby mode.
• Auto Disable Network Standby Mode: Allows the projector to
disable the network function after a set period of time after it enters
standby mode. For instance, if 20 min is selected, the projector is able to
provide the network function for 20 minutes after it enters standby mode.
When 20 minutes is up, the projector enters normal standby mode. If Off
is selected, the projector will not provide the network function in standby
mode.
• Audio Pass Through: The projector can play sound when it is in standby
mode and the corresponding jacks are correctly connected to devices.
Press
/
to choose the source that you wish to use. See
on page 22
for how to make the connection.
Reminder Message
Sets the reminder messages on or off.
Power On/Off Settings
• Direct Power On: Allows the projector to turn on automatically once
the power is fed through the power cord.
• Signal Power On: Sets whether to turn the projector directly on
without pressing POWER or
mode and detects a VGA signal or a HDMI signal with 5V power.
• Auto Power Off: Allows the projector to turn off automatically if no
input signal is detected after a set period of time to prevent unnecessary
waste of light source life.
See
"Utilizing the password function" on page
ON when the projector is in standby
30.
"Connection"
Advertisement
Table of Contents
