Table of Contents
Advertisement
Digital Zoom
Magnifies or reduces the projected image.
1. After the Zoom bar displays, press
2. To navigate the picture, press OK to switch to the panning mode and
3. To reduce size of the picture, press OK to switch back to the zoom in/
Digital Shrink & Shift
Shrinks and/or shifts the projected image.
1. After the adjustment bar displays, press
Image Resizing
2. Press OK to activate digital shift function.
3. After digital shift function is activated, press the directional arrows
4. Press AUTO to restore the picture to its original size.
Blanking
• Modes of adjustment:
• Top: To adjust the top blanking area on the projected picture
• Bottom: To adjust the bottom blanking area on the projected picture.
• Left: To adjust the left blanking area on the projected picture.
• Right: To adjust the right blanking area on the projected picture.
• Reset all blanking settings: To set up all Blanking settings to default.
to a desired size.
press the directional arrows ( ,
control to navigate the picture.
out function, and press AUTO to restore the picture to its original size.
You can also press repeatedly until it is restored to the original size.
The picture can only be navigated after it is magnified. You can further magnify the
picture while searching for details.
magnify the picture to a desired size.
( ,
,
,
) to shift the image.
The picture can only be shifted after it shrank.
repeatedly to magnify the picture
,
,
) on the projector or remote
/
repeatedly to shrink or
Menu operation
47
Advertisement
Table of Contents
