Planet IGS-4215-4P4Tv2 User Manual page 342

• Priority
• Current Used [mA]
• Power Used [W]
• Power Allocation
PoE Extended Function
In the "Extended" operation mode, the IGS-4215 series operates on a per-port basis at 10Mbps duplex operation but can
support PoE power output over a distance of up to 200 meters overcoming the 100 meters limit on Ethernet UTP cable.

The Priority represents PoE ports priority. There are three levels of power priority
named Low, High and Critical.
The priority is used in case the total power consumption is over the total power
budget. In this case, the port with the lowest priority will be turned off, and power
for the port of higher priority will be offered.
The Power Used shows how much current the PD currently is using.
The Power Used shows how much power the PD currently is using.
The Power Allocation column shows per port maximum value of PoE power.
Once power overload is detected, the port will automatically shut down and
continue to be in detection mode until Pad's power consumption is lower than
the power limit value.
95W 802.3bt PoE++

36W End-span PoE

36W Mid-span PoE

342
User's Manual of IGS-4215 PoE Series