Buttons
: Click to refresh the page immediately.
: Click to save changes.
:
Click to undo any changes made locally and revert to previously saved values.
Figure 4-14-2: Ethernet Ring Protocol Switch Configuration page screenshot
PRL Configuration:
Object
• PRL Role
• PRL Port
• Clear
Instance Command:
Object
• Command
• Port
: Click to add a new Protection group entry.
Description
It can be either RPL owner or RPL Neighbor.
This allows to select the east port or west port as the RPL block.
If the owner has to be changed, then the clear check box allows to clear the RPL
owner for that ERPS ring.
Description
Administrative command. A port can be administratively configured to be in either
manual switch or forced switch state.
Port selection - Port0 or Port1 of the protection Group on which the command is
applied.
User's Manual of IGS-4215 PoE Series
331