Planet IGS-4215-4P4Tv2 User Manual page 324

• Destination Port
• TCP Flags
Specify the destination port for this ACE.
 Any: No specifc destination port is specified (destination port status is
"don't-care").
Single: If you want to filter a specific destination port with this ACE, you can

enter a specific destination port value. A field for entering a destination port
value appears. The allowed range is 0 to 65535. A frame that hits this ACE
matches this destination port value.
Range: If you want to filter a specific destination port range filter with this

ACE, you can enter a specific destination port range value. A field for
entering a destination port value appears.
UGR Specify the TCP "Urgent Pointer field significant" (URG) value for this
ACE.
Set: TCP frames where the URG field is set must be able to match

this entry.
Unset: TCP frames where the URG field is set must not be able to

match this entry.
Don't Care: Any value is allowed ("don't-care").

ACK Specify the TCP "Acknowledgment field significant" (ACK) value for this
ACE.
Set: TCP frames where the ACK field is set must be able to match

this entry.
Unset: TCP frames where the ACK field is set must not be able to

match this entry.
Don't Care: Any value is allowed ("don't-care").

PSH Specify the TCP "Push Function" (PSH) value for this ACE.
Set: TCP frames where the PSH field is set must be able to match

this entry.
Unset: TCP frames where the PSH field is set must not be able to

match this entry.
Don't Care: Any value is allowed ("don't-care").

RST Specify the TCP "Reset the connection" (RST) value for this ACE.
Set: TCP frames where the RST field is set must be able to match

this entry.
Unset: TCP frames where the RST field is set must not be able to

match this entry.
Don't Care: Any value is allowed ("don't-care").

SYN Specify the TCP "Synchronize sequence numbers" (SYN) value for this
ACE.
Set: TCP frames where the SYN field is set must be able to match

this entry.
Unset: TCP frames where the SYN field is set must not be able to

match this entry.
Don't Care: Any value is allowed ("don't-care").

FIN Specify the TCP "No more data from sender" (FIN) value for this ACE.
Set: TCP frames where the FIN field is set must be able to match

this entry.
324
User's Manual of IGS-4215 PoE Series