Table of Contents
Advertisement
• PD Type
• PoE Extension
DC supply and pins 7-8 (pair #4 in both T568A and T568B)
provide the return.
Maximum power is 36.0 watts.
Endspan: Set inline mode to IEEE 802.3at PoE+ End-span PSE.
Pins 1-2 (pair #2 in both T568A and T568B) form one side of the
DC supply and pins 3-6 (pair #3 in both T568A and T568B)
provide the return.
Maximum power is 36.0 watts.
802.3bt: Set inline mode to IEEE 802.3bt PoE++ Type-4 or Type-3 PSE.
Pins 1-2 (pair #2 in both T568A and T568B) form one side of the
DC supply and pins 3-6 (pair #3 in both T568A and T568B)
provide the return.
Pins 4-5 (pair #1 in both T568A and T568B) form one side of the
DC supply and pins 7-8 (pair #4 in both T568A and T568B)
provide the return.
Maximum power is 95~60 watts.
It allows user to enable legacy mode or force power function in a specified PoE
Inline mode.
Standard: (default)
Fully conforms to the IEEE 802.3 at/bt standard
Legacy:
The legacy detection is to identify the valid current signature of the
PDs that do not fully follow the IEEE 802.3af/at/bt standard. This
protects against damage to the PDs as the right PoE mode is
applied.
Force:
Once the force power is enabled, the PoE port will ignore the PoE
classification behaviors and directly deliver power over UTP cable no
matter what Ethernet device is attached, or even there is no Ethernet
cable plugged.
Please be careful when using force power function and make sure
the remote device is PoE powered device (PD).
For user to enable or disable per port PoE Extension function.
Default setting is "Disable".
In the Extend operation mode, the PoE port operates at 10Mbps duplex
operation but can support PoE power output over a distance of up to 160 meters
overcoming the 100m limit on Ethernet UTP cable.
341
User's Manual of IGS-4215 PoE Series
Advertisement
Table of Contents
