Planet IGS-4215-4P4Tv2 User Manual page 104

Duplex
•
Flow Control
•
Buttons
: Click to apply changes.
The page includes the following fields:
Object
• Port
• Description
• Enable State
Link Status
•
Speed
•
Duplex
•
Flow Control
•
Configuration
• Flow Control Status
100M – Set up 100M Force mode.

1000M – Set up 1000M Force mode.

Select any available link duplex for the given switch port. Draw the menu bar to
select the mode.
Auto – Set up Auto negotiation.

Full - Force sets Full-Duplex mode.

Half - Force sets Half-Duplex mode.

When Auto Speed is selected for a port, this section indicates the flow control
capability that is advertised to the link partner. When a fixed-speed setting is
selected, that is what is used. Current Rx column indicates whether pause
frames on the port are obeyed. Current Tx column indicates whether pause
frames on the port are transmitted. The Rx and Tx settings are determined by the
result of the last Auto-Negotiation. Check the configured column to use flow
control. This setting is related to the setting for Configured Link Speed.
Figure 4-3-2: Port Status Page Screenshot
Description
This is the logical port number for this row.
Click to indicate the port name.
Display the current port state.
Display the current link status.
Display the current speed status of the port.
Display the current duplex status of the port.
Display the current flow control configuration of the port.
Display the current flow control status of the port.
104
User's Manual of IGS-4215 PoE Series