Table of Contents
Advertisement
◦
7.
Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until
the drive snaps into place. The bottom bay is for the primary hard drive. The upper bay is for an
optional secondary hard drive.
Figure 3-31
82
Chapter 3 Microtower (MT) Hardware Upgrades
Hold the drive and bracket firmly together and turn the assembly over. Install four M3
screws to secure the drive to the bracket.
Figure 3-30
Securing the Drive in the Adapter Bracket
Sliding a Hard Drive into the Drive Bay
ENWW
- Quick Links:
- Standard Configuration Features
Hide quick links:
Advertisement
Table of Contents
