Table of Contents
Advertisement
7.
Remove the black screw on the front of the chassis behind the bezel. The screw is located next
to the optical drive and is labeled "BEZEL."
Figure 5-35
8.
Replace the front bezel.
9.
Install the security screw through the middle front bezel release tab and into the chassis to
secure the front bezel in place.
Figure 5-36
10.
Replace the access panel.
11.
If the computer was on a stand, replace the stand.
12.
Reconnect the power cord and turn on the computer.
13.
Lock any security devices that were disengaged when the access panel was removed.
156 Chapter 5 Ultra-Slim Desktop (USDT) Hardware Upgrades
Retrieving the Front Bezel Security Screw
Installing the Front Bezel Security Screw
ENWW
- Quick Links:
- Standard Configuration Features
Hide quick links:
Advertisement
Table of Contents
