Table of Contents
Advertisement
8.
To remove a SODIMM, press outward on the two latches on each side of the SODIMM (1) then
pull the SODIMM out of the socket (2).
Figure 5-10
9.
Slide the new SODIMM into the socket at approximately a 30° angle (1) then press the SODIMM
down (2) so that the latches lock it in place.
Figure 5-11
NOTE:
with the tab on the memory socket.
10.
Replace the access panel.
11.
If the computer was on a stand, replace the stand.
12.
Reconnect the power cord and turn on the computer.
13.
Lock any security devices that were disengaged when the computer cover or access panel was
removed.
ENWW
Removing a SODIMM
Installing a SODIMM
A memory module can be installed in only one way. Match the notch on the module
Installing Additional Memory 141
- Quick Links:
- Standard Configuration Features
Hide quick links:
Advertisement
Table of Contents
