Table of Contents
Advertisement
11.
To install a new expansion card, hold the card just above the expansion socket on the system
board then move the card toward the rear of the chassis so that the bracket on the card is
aligned with the open slot on the rear of the chassis. Press the card straight down into the
expansion socket on the system board.
Figure 3-14
NOTE:
connector seats properly in the expansion card slot.
12.
Rotate the slot cover retention latch back in place to secure the expansion card.
Figure 3-15
13.
Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
14.
Replace the computer access panel.
15.
Reconnect the power cord and turn on the computer.
70
Chapter 3 Microtower (MT) Hardware Upgrades
Installing an Expansion Card
When installing an expansion card, press firmly on the card so that the whole
Closing the Expansion Slot Retainer
ENWW
- Quick Links:
- Standard Configuration Features
Hide quick links:
Advertisement
Table of Contents
