HP 6200 Pro Microtower Series Hardware Reference Manual page 160

2. Insert the Kensington lock into the Kensington lock slot on the back of the monitor and secure
the lock to the monitor by inserting the key into the key hole on the rear of the lock and rotating
the key 90 degrees.
Figure 5-28
3. Slide the security cable through the hole in the Kensington lock on the rear of the monitor.
Figure 5-29
152 Chapter 5 Ultra-Slim Desktop (USDT) Hardware Upgrades
Installing the Kensington Lock on the Monitor
Securing the Monitor
ENWW