Specifications; General Specifications; Usb Line Specifications - Fujitsu MB95200H Series Operation Manual

6 Specifications

6.1. General specifications

Table 1 lists the general specifications of the adapter.
Item
Name
Model number
Adapter power input
Power supply
specification User power input
POWER LED indication
User interface connector *3
Operation temperature/humidity
Storage temperature/humidity
Dimensions
Weight
*1: The maximum and minimum voltage depends on the MCU used. For details, contact the
Fujitsu sales or support representative.
*2: Does not include the power consumption of the MCU.
*3: The part number of the connector is: 0-281271-1 (Tyco Electronics Corporation)

6.2. USB line specifications

Table 2 lists the USB line specifications of the adapter.
Conforming standard
Communication method
Data transfer rate
Connector shape
Power supply
BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 6 Specifications
Table 1 General specifications
[Green]: On when only adapter power is supplied (with the
USB cable connected).
[Red]:
[Orange]: On when both adapter power and user power are
supplied.
AMP standard IDC10 compliant key type (with center key)
+5 to +35
℃
0 ℃ to +70
Adapter
protrusions)
IDC10 cable
connector)
Table 2 USB line specifications
Item
MCU-UM-500001-E-11 – Page
Specification
F2MC family BGM adapter
MB2146-08-E
Max: 50mA (uses USB BUS power)
+ 2.7V to + 5.5V *1, Max: 20mA*2
On when only user power is supplied.
/ 20% to 80% (no condensation)
℃
℃ / 20% to 80% (no condensation)
case: 55.7mm(W)X127mm(D)X30mm(H)(excluding
length: 125mm
169g (Including USB Cable).
Description
USB1.0
Full speed bulk transfer
12Mbps
Series B
BUS Powered
6
(excluding user interface