Turning The Screen Off During Music Playback - BenQ Portable Series User Manual

Turning the screen off during music playback

You can enjoy music playback via the projector without a projection
screen.
Press the button on the remote control or projector, and select the
Audio-Only Mode to switch the projector to audio-only mode. The screen
is turned off while the music playback continues.
To stop the playback or to perform other operations, press any key on the
remote control to bring the projection screen back.
Connecting the projector to an
external Bluetooth speaker /
headphone
Available only when the input source is ATV.
1. Make sure the ATV dongle is installed properly (see
dongle" on page
2. Power on the projector (see
28).
3. Press the
4. Select Remotes & Accessories.
5. Select Add Accessory.
6. Activate Bluetooth-pairing mode on the speaker or headphones.
7. Select the speaker or headphones from the device list shown on
screen.
8. Select Pair.
When the projector and speaker or headphones have successfully
25).
"Powering on and initial setup" on page
button on the remote control.
42
"Installing the ATV