Remote Control Effective Range; Setting To Power On Projector By Remote Control - BenQ Portable Series User Manual

Remote control effective range

The projector has one IR remote control sensor located at the front of the
projector with a range of 8 meters (~26 feet) at an angle of 30 degrees (left
and right) and 20 degrees (up and down). Prior to remote control pairing
process during the setup wizard (see
page 28), the remote control can only be used either by pointing it
directly at the IR sensor or by reflecting the IR signal off of a wall/screen,
making sure that there are no obstacles between the remote control and
the IR sensor on the projector.
Once the remote control has been paired to the ATV dongle installed in the
projector, you will be able to use it at any angle within a range of 8 meters
(~26 feet).
Note
Voice search functionality on the remote control is only available after the remote control has been
paired to the projector during the setup wizard process. See
28 for more details.
Setting to power on projector by
remote control
Powering on the projector via the remote control is not enabled by default.
To enable it, press the
Once enabled, the projector scans for remote control signals when it is
powered off and may drain battery power gradually.
"Powering on and initial setup" on
> System > Use remote control to power on.
19
"Powering on and initial setup" on page