System - BenQ Portable Series User Manual

System

Item
Language
Use remote control to power on
Turn off the Backlight of the
remote control
System Update
System Information
Projector Information
Factory Reset
Options and descriptions
Sets the language for the projector.
Sets to power on the projector via the
power button on the remote control.
Once enabled, the projector scans for
remote control signals when it is powered
off and may drain battery power quickly.
Displays the tip to turn off remote control
backlight. See "Turning remote control
backlight on/off" on page 20
information.
Allows you to update the software on
the projector via a USB flash drive. See
"Upgrading your projector" on page 32
for more information.
Displays hardware/software information
for the projector including its device and
serial number.
Displays information on the current
status of the projector including
the Detected Resolution, Source,
Picture Mode, Power Mode,
Color System, Light Usage Time,
Firmware Version, and Service Code.
Returns the projector to its factory default
state.
Note
This function resets your projector only. If you wish to
reset your ATV dongle (QS02), perform factory reset
from the Android settings menu.
52
for more