Epson SureColor SC-F6300 Series User Manual page 66

SC-F6300 Series User's Guide
Caution:
❏ During maintenance, wear protective clothing,
including protective eyewear, gloves, and a
mask.
If ink, waste ink, or cap cleaning liquid comes
into contact with your skin or enters your eyes
or mouth, immediately take the following
actions.
❏ If fluid adheres to your skin, wash it off
using large volumes of soapy water. If you
notice any reaction developing in the
affected area, consult with a qualified
physician immediately.
❏ If ink gets into your eyes, wash them out
immediately with water. Failure to observe
this precaution could result in bloodshot
eyes or mild inflammation. Consult with a
qualified physician if any other problems
should develop.
❏ If fluid enters your mouth, consult with a
physician as soon as possible.
❏ If swallowed, do not induce vomiting.
Consult with a physician as soon as
possible. If vomiting is induced, vomited
material may enter the windpipe, which is
dangerous.
❏ Store ink packs, waste ink, and cap cleaning
liquid in a location out of reach of children.
❏ Remove the paper from the printer before
proceeding.
❏ Never touch the belts, circuit boards, or any parts
that do not require cleaning. Failure to observe this
precaution could result in malfunction or reduced
print quality.
❏ Do not use anything other than the supplied or
consumable cleaning stick. Other types of stick that
produce lint will damage the print head.
❏ Always use fresh cleaning sticks. Re-using sticks
can make stains even harder to remove.
❏ Do not touch the tips of the cleaning sticks. Oil from
your hands could damage the print head.
Maintenance
❏ Do not use anything other than the cap cleaning
liquid specified to clean the caps. Using anything
else could result in malfunction or reduced print
quality.
❏ Touch a metallic object before starting work to
discharge any static electricity.
66