Epson SureColor SC-F6300 Series User Manual page 55

SC-F6300 Series User's Guide
Item
Roll Paper Setup
Auto Cut
Refresh Margin
Page Line
Roll Paper Margin
Side
Top
Bottom
Roll Paper Remaining
Remaining Alert
Using the Control Panel Menu
Parameter Explanation
*
Choose On to automatically cut roll paper using the built-in cutter as
On
each page is printed or Off to disable auto paper cutting.
Off
*
If On is selected during borderless printing, the printer will
On
automatically trim the leading edge to remove any ink stains that
may have been left by the previous copy; to disable this feature,
Off
choose Off. However, borderless printing is not guaranteed for this
printer.
*
If Auto Cut is Off, you can choose to print (On) or not print (Off) cut
On
lines on roll paper. If Auto Cut is set to On, printing cannot be
Off performed.
*
Sets the margins for printing on the loaded paper. When settings
3mm
have been made using RIP, priority is given to the RIP settings.
15mm
"Printable area" on page 43
U
5mm
*
15mm
5mm
*
15mm
150mm
* Select whether or not (On/Off) to display the amount of remaining
On
roll paper. When you select On and enter the roll paper length, Roll
Paper Remaining is performed.
Off
*
Displayed when On is selected for Roll Paper Remaining.
1 to 15 m (5 )
Set within a range from 1 to 15 m to display a warning when the
amount of remaining roll paper drops below that limit. Paper length
is set in increments of 1 m.
55