Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Epson SC-F6200 Series
Summary of Contents for Epson SC-F6200 Series
- Page 1 User’s Guide CMP0049-01 EN...
- Page 2 (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
-
Page 3: Table Of Contents
Printable area......36 Front (SC-F6200 Series)....8 Turning Off the Power Using Power Off Timer Front (SC-F6000 Series). - Page 4 Technical Support Web Site....87 Contacting Epson Support....87 Before Contacting Epson.
-
Page 5: Introduction
SC-F6200 Series/SC-F6000 Series User's Guide Introduction ❏ Keep the entire computer system away from Introduction potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones. ❏ Use only the type of power source indicated on the Important Safety product’s label. -
Page 6: When Handling The Ink Packs
The symbols on the product ❏ Wear protective eyewear, gloves, and a mask when The symbols on this Epson product are used in order to performing maintenance. ensure safety and proper use of the product and to prevent danger to customers and other persons, and Should ink contact your skin or enter your eyes or property damage. - Page 7 SC-F6200 Series/SC-F6000 Series User's Guide Introduction ❏ Windows Vista refers to Windows Vista Home Basic Edition, Windows Vista Home Premium Edition, Windows Vista Business Edition, Windows Vista Enterprise Edition, and Windows Vista Ultimate Edition. ❏ Windows XP refers to Windows XP Home Edition, Windows XP Professional x64 Edition, and Windows XP Professional.
-
Page 8: Printer Parts
SC-F6200 Series/SC-F6000 Series User's Guide Introduction Printer Parts Front (SC-F6200 Series) Printer cover Open this cover when cleaning the printer or clearing jams. Maintenance box covers Make sure you attach the maintenance box supplied before using the product. Casters There are two casters on each leg. The casters are normally kept locked once the printer is in place. - Page 9 SC-F6200 Series/SC-F6000 Series User's Guide Introduction Slider “Slider” on page 14 Side cover Open the side cover to remove the slider for chip unit replacement. Always close the side cover securely after inserting the slider. Waste Ink Bottle holder Place the Waste Ink Bottle in this holder.
- Page 10 SC-F6200 Series/SC-F6000 Series User's Guide Introduction Alert lamp This lamp lights or flashes when an error occurs. Lights or : An error has occurred. How the lamp lights or flashes varies with the type of error. The control panel flashes displays a description of the error.
-
Page 11: Front (Sc-F6000 Series)
SC-F6200 Series/SC-F6000 Series User's Guide Introduction Front (SC-F6000 Series) Printer cover Open this cover when cleaning the printer or clearing jams. Maintenance box covers Open these covers when replacing the Maintenance Box. Make sure they are attached before using the product. - Page 12 SC-F6200 Series/SC-F6000 Series User's Guide Introduction AC inlet Connect the supplied power cable here. LAN port Connects the LAN cable. Data light The network connection status and data reception are indicated by a lit or flashing light. : Connected. Flashing : Receiving data.
- Page 13 SC-F6200 Series/SC-F6000 Series User's Guide Introduction Paper eject guide Guides the paper so that it is ejected smoothly.
-
Page 14: Slider
SC-F6200 Series/SC-F6000 Series User's Guide Introduction Slider Roll paper adapter Use the supplied roll paper adapter when loading roll paper onto the printer. “Loading Roll Paper” on page 25 Slider Install the chip unit that comes with the ink pack before refilling ink. -
Page 15: Control Panel
SC-F6200 Series/SC-F6000 Series User's Guide Introduction Screen Control panel Displays the printer's status, menus, error messages, and so on.U “Screen View” on page 16 Menu button Displays the menu for the tab currently selected in the display.U “Using the Control Panel Menu” on... -
Page 16: Screen View
SC-F6200 Series/SC-F6000 Series User's Guide Introduction Displays the Maintenance menu, which is used for Displays the printer's status, operation, and error nozzle checks and head cleaning. messages. “Adjusting the Print Head” on page 69 “What to Do When a Message Is Displayed” on... - Page 17 SC-F6200 Series/SC-F6000 Series User's Guide Introduction : Check the ink level in the ink tank, and . : The Paper Tab This tab shows the type of paper in the printer then replace the chip unit and refill the and can be used to access the Paper menu.
-
Page 18: Features
1000 ml. This eliminates the need to replace ink cartridges so frequently. Waste Ink Bottle The SC-F6200 Series is equipped with a Waste Ink Bottle as standard. This eliminates the need for frequent Maintenance Box replacement. This also reduces the amount of wasted plastic. -
Page 19: High Print Quality
*1 When using the SC-F6200 Series Select High Density Black or Black as the Black ink type when you buy the printer. When changing the type of... -
Page 20: Notes When Not Using The Printer
(lid) to prevent the print head from drying out. In this case, turn on Contact your dealer or Epson Support. the power and wait a while until capping is ❏ The roller may leave an impression on paper that is performed automatically. -
Page 21: Notes On Handling Ink Packs And Ink Tanks
❏ Do not use if the High Density Black and Black inks are mixed. When changing the type of Black ink being used, the ink tank should only be changed by a service engineer. Changing the type of Black ink is provided for a fee. Contact your dealer or Epson Support. -
Page 22: Introducing The Supplied Software
USB. Refer to the software RIP manual for details about the status display. EPSON LFP Remote Panel 2* The EPSON LFP Remote Panel 2 is software used to copy paper settings set via PC and update printer firmware. -
Page 23: Removing Software
Panel 2 Select the software you want to remove and then click Uninstall/Change (or Change/Remove). EPSON LFP Remote Panel 2 is used to update firmware from a computer and copy paper settings bank created Select the EPSON SC-F6200 Series Comm in the printer's setup menu to a computer. -
Page 24: Closing The Epson Lfp Remote Panel 2
LFP Remote Panel 2 - EPSON LFP Remote Panel Click the item to execute on the main screen of the EPSON LFP Remote Panel 2. Refer to the EPSON LFP Remote Panel 2 help for details. Mac OS X Double-click Applications > Epson Software - EPSON LFP Remote Panel 2 - EPSON LFP Remote Panel 2 to open the EPSON LFP Remote Panel 2 main window. -
Page 25: Basic Operations
“Supported Paper” on page 83 Turn on the printer by pressing the P button. 2-inch core For the SC-F6200 Series, next open the roll paper cover. Confirm that the adapter holder lock lever is raised. Raise the adapter lock lever to release the lock on... - Page 26 SC-F6200 Series/SC-F6000 Series User's Guide Basic Operations Raise the adapter lock lever to release the lock on Press the ( button on the control panel. each of the two roll paper adapters. Confirm that Roll Paper is highlighted in the display and press the Z button.
-
Page 27: Cutting The Roll Paper
Cut the paper using scissors or a third-party cutter. Setting methods For the SC-F6200 Series, close the roll paper cover. Use the l/r buttons in the control panel to select the / tab and press the Z or Menu button. The Setup menu will be displayed;... -
Page 28: Removing The Roll Paper
SC-F6200 Series/SC-F6000 Series User's Guide Basic Operations Removing the roll paper Buttons that are used in the following settings This section describes how to remove and store roll paper after printing. The pressure rollers may leave impressions on paper that is left in the printer. - Page 29 SC-F6200 Series/SC-F6000 Series User's Guide Basic Operations For the SC-F6200 Series, open the roll paper Remove the roll paper adapters. cover. After rewinding the roll paper carefully, store it Raise the roll lock lever. in the original package. Holding the paper by the roll adapters, move the roll to the roll rest.
-
Page 30: Viewing And Changing Paper Settings
SC-F6200 Series/SC-F6000 Series User's Guide Basic Operations Viewing and Changing Adjusting Settings Paper Settings Follow the steps below to change the settings displayed. The following is displayed in the control panel after Buttons that are used in the following settings paper is loaded. -
Page 31: Replacing Paper
❏ Select Custom Paper Setting in the printer Paper Buttons that are used in the following settings menu. “Paper menu” on page 44 ❏ EPSON LFP Remote Panel 2 can be used to copy from the computer the paper settings you configured in the printer settings menu. Note: ❏... -
Page 32: Saving Settings
SC-F6200 Series/SC-F6000 Series User's Guide Basic Operations ❏ Platen Gap Press the d/u buttons to highlight Custom Paper Setting and press the Z button. ❏ Detect Paper Thickness The Custom Paper Setting menu will be ❏ Paper Feed Adjust displayed. - Page 33 SC-F6200 Series/SC-F6000 Series User's Guide Basic Operations Roll Paper Tension Press the y button to return to the paper settings menu. Select High or Extra High if the paper wrinkles during printing. Detect Paper Thickness Press the d/u buttons on the paper settings...
-
Page 34: Paper Feed Adjust
SC-F6200 Series/SC-F6000 Series User's Guide Basic Operations The cursor will then move on to the next input Select Custom Paper Setting from the paper area. Repeat this process until you are finished. menu. If you make a mistake, press the l button to Press the d/u buttons to select the slot (1 to 10) delete the previous character. -
Page 35: Performing Adjustments During Printing
SC-F6200 Series/SC-F6000 Series User's Guide Basic Operations Press the d/u buttons to select the slot (1 to 10) If you are not satisfied with the results, use the where you want to save the custom paper d/u buttons to enter an adjustment value. -
Page 36: Printable Area
Premium Glossy 250/Premium Semigloss 250/ Premium Luster 260/Premium Semimatte 260 When printing in the following print modes for the SC-F6200 Series, the following roll paper margins are set. indicates factory default settings. 360 x 720 2 pass... - Page 37 SC-F6200 Series/SC-F6000 Series User's Guide Basic Operations Roll Paper Margin Margin Values Important: Parameter ❏ Printing is distorted when the trailing edge of the roll paper comes off the core. Make sure the A=19mm Top5mm/Bottom5mm trailing edge does not come inside the printing area.
-
Page 38: Turning Off The Power Using Power Off Timer
SC-F6200 Series/SC-F6000 Series User's Guide Basic Operations Turning Off the Power Canceling Printing Using Power Off Timer Press the W button on the printer, select Job Cancel on the screen, and then press the Z button. The printer offers the following two power management options. -
Page 39: Using The Control Panel Menu
The steps for displaying the various menus are shown below. Menu operations are explained using the SC-F6200 Series Paper menu as an example. * After pressing the Z button to select the highlighted option, press the y button to return to the previous menu. Press the W... -
Page 40: Menu List
SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Menu List The items and options available in the menu are described below. See the reference pages for more details on each item. ,Print Job menu “Print Job menu” on page 44 Setting items and setting values marked with asterisks indicate the following printer models. - Page 41 SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Menu item Description Custom Paper XXXXXXXXXXXX Select Reference Photo Paper Displays the EPSON-unique Setting XXXXXXXX Paper paper name. Matte Paper (name of custom paper type) Plain Paper Others No Paper Selected...
- Page 42 SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu /Setup menu “Setup menu” on page 48 Setting items and setting values marked with asterisks indicate the following printer models. *1: SC-F6000 Series only *2: Only available for models with a Waste Ink Bottle...
- Page 43 SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Menu item Description Network Setup IP Address Setting Auto Panel IP Address, Subnet Mask, Default Gateway Print Status Sheet Press Z to start printing. Restore Settings Yes,No Power Settings Sleep Mode...
-
Page 44: Menu Descriptions
SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Menu Descriptions Print Job menu Setting items and setting values marked with asterisks indicate the following printer models. *1: SC-F6000 Series only *2: Only available for models with a Waste Ink Bottle... - Page 45 SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Item Description Custom XXXXXXXXXXX Select Photo Paper You can select the paper type that is the closest to Paper (name of Reference the paper you are using. Matte Paper Setting...
- Page 46 SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Item Description Paper Feed Pattern Use this setting if you are unable to resolve Adjust banding issues (horizontal striped lines or uneven Value colors) in the standard print area even after head cleaning or head alignment.
-
Page 47: Maintenance Menu
Head Maintenance For the SC-F6000 Series, this is displayed when you update to the latest firmware. You can update firmware by using EPSON LFP Remote Panel 2. For details, see the EPSON LFP Remote Panel 2 help. “Using EPSON LFP Remote Panel 2 ” on page 23 Clean the print head. -
Page 48: Setup Menu
SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Item Description If you replace the Waste Ink Bottle before being prompted by a mes- Waste Ink Counter sage on the control panel, run the Waste Ink Bottle in the control panel, run the Waste Ink Counter option after replacement. - Page 49 SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Item Description Printer Setup Roll Paper Auto Cut Choose On to automatically cut roll paper using Setup the built-in cutter as each page is printed, Off to disable auto paper cutting.
- Page 50 SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Item Description Advanced Roll Paper Select High or Extra High if the paper wrinkles Settings Tension during printing. Normal Roll Paper Tension can be specified separately for each paper type using the Custom Paper Setting High option in the Paper menu.
- Page 51 SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Item Description Periodical Cleaning Light Off, 1 to 240 hours Select the strength and frequency with which the printer performs head cleaning. Periodical Mediu Cleaning will not be performed while Off is selected.
- Page 52 SC-F6200 Series/SC-F6000 Series User's Guide Using the Control Panel Menu Item Description Power Settings Sleep Mode 5 to 240 minutes The printer enters sleep mode automatically when there are no errors, no print jobs being received, and no control panel or other operations are performed for the selected period.
-
Page 53: Maintenance
Note the following points when performing maintenance. Be sure to read the Safety Data Sheet before performing maintenance. Cleaning the outside You can download it at your local Epson Web site. Remove any paper from the printer. Caution: ❏ During maintenance, wear protective... -
Page 54: Stirring High Density Black Ink
SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Turn on the printer, and load it with widest Important: available roll paper. ❏ Be sure not to touch the roller or the ink absorbing areas (b, shown in gray) “Loading and Removing the Roll Paper” on during cleaning;... - Page 55 SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Open the ink inlet cover for the slider on which an HDK ink label is stuck. Remove the ink inlet cap from the ink tank. Hold the part shown in the circled area in the illustration to remove the ink inlet cap.
- Page 56 SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Move the stirring stick up and down within one Close the ink inlet cover. second and repeat about 15 times. When moving the stirring stick, touch the ink inlet cap to the lip of the ink tank and raise it until you can see the hook on the stirring stick.
-
Page 57: Using The Head Maintenance Kit
Place the cleaning pad by pressing the edge of the the printer's firmware. You can update firmware cleaning pad against the roller. by using EPSON LFP Remote Panel 2. For details, see the following. “Using EPSON LFP Remote Panel 2 ” on... - Page 58 SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Use your finger to rub the areas indicated in the Close the printer cover, and then press the Z illustration to secure the cleaning pad. button. Head cleaning starts. When head cleaning is complete, this cleaning procedure is finished.
-
Page 59: Replacing And Refilling Consumables
The refill method differs depending on the type of ink. Use the refill method that matches the type of ink. Before performing operations, check the “Safety data sheet”and the following notes. You can download it at your local Epson Web site. - Page 60 If the amount of ink remaining is more than Important: 70mm from the bottom of the ink tank ❏ Epson recommends the use of genuine Epson We recommend continuing to use the printer ink packs. until the amount of ink remaining in the ink tank...
- Page 61 SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Hook a finger into the indentation on top of Install the chip unit that comes with the new ink slider and pull it straight out. pack. During installation, check to ensure that the labels on the slider and the chip unit are the same color.
- Page 62 SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Except for High Density Black ink Shake the new ink pack for 5 seconds 15 times horizontally in approximately 5 cm movements as shown in the illustration. Open the ink inlet cover on the slider.
- Page 63 SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Tear off the ink pack spout opening. (2) Hook the stirring stick over the projection on the ink tank.
- Page 64 SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Except for High Density Black ink Fill the ink tank with the ink from the ink pack. Insert the spout of the ink pack into the ink tank ink inlet groove and slowly tilt to pour out the ink.
-
Page 65: Disposing Of Waste Ink
SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Raise the stopper. Disposing of Waste Ink Be sure to replace the Waste Ink Bottle when the following message is displayed on the control panel. ❏ Prepare empty waste ink bottle. ❏ Replace waste ink bottle and press Z. -
Page 66: Replacing Maintenance Boxes
SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Remove the Waste Ink Bottle from the Waste Ink Important: Bottle holder. ❏ Be sure to confirm that the waste ink tube is inserted in the mouth of the waste ink bottle. Ink will spill onto the surrounding area if the tube is not inserted in the bottle. - Page 67 SC-F6200 Series/SC-F6000 Series User's Guide Maintenance “Options and Consumable Products” on Pull the Maintenance Box out. page 81 Lifting the Maintenance Box up releases the lock, and you can simply pull it straight out. Important: Do not reuse maintenance boxes that have been removed and left out in the open for a long period of time.
-
Page 68: Replacing The Cutter
SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Press the d/u buttons to highlight Replace Replacing the Cutter Cutter and press the Z button. Replace the cutter when it is not cutting paper cleanly. The cutter will move to the replacement position. -
Page 69: Adjusting The Print Head
SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Checking for clogged nozzles Important: Perform a nozzle check to check for clogs if the printer Use a cross-head screwdriver to tighten down has not been used for an extended period or before the screw to hold the cutter in place. Screw up important print jobs. -
Page 70: Cleaning The Print Head
SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Cleaning the print head Buttons that are used in the following settings From the control panel you can clean all nozzles or select to clean only those nozzles for which the printed nozzle check pattern indicates a problem. -
Page 71: Minimizing Print Misalignments
SC-F6200 Series/SC-F6000 Series User's Guide Maintenance ❏ Cleaning Cycle Select nozzle rows for cleaning. Head cleaning is performed automatically at ❏ Press the d/u buttons to highlight numbers selected intervals of 1 to 10 pages. corresponding to check patterns with faint or missing segments and press the Z button to select. -
Page 72: Alignment)
In such cases, submit the "Safety data sheet" to the industrial waste disposal company. You can download it at your local Epson Web site. Regularly Replaced Parts The following parts must be replaced on a regular basis. - Page 73 SC-F6200 Series/SC-F6000 Series User's Guide Maintenance Ink supply tank: The time until replacement varies according to the conditions of use. The lifetime of these parts depends on the usage environment. Review the quality of your prints in order to determine when replacments are required.
-
Page 74: Problem Solver
Use EPSON LFP Remote Panel 2 to update the firmware again. Restart the printer. If this message appears on the LCD panel again, contact your dealer or Epson Support. Command Error Press the W button and select Job Cancel to stop printing. Check to confirm that the Check print settings on RIP. -
Page 75: When A Maintenance Call/Service Call Occurs
Maintenance Request A part used in the printer is nearing the end of its service life. Replace Part Soon/Replace Part Now Contact your dealer or Epson Support and tell them the maintenance request XXXXXXXX code. You cannot clear the maintenance request until the part is replaced. A service call occurs if you continue to use the printer. -
Page 76: Troubleshooting
SC-F6200 Series/SC-F6000 Series User's Guide Problem Solver Troubleshooting Is the USB hub recognized correctly? Make sure the USB hub is recognized correctly on the computer. If the computer correctly detects the USB hub, disconnect all USB hubs from the computer and You cannot print (because the connect the printer directly to the computer USB port. -
Page 77: The Prints Are Not What You Expected
Off is selected for Paper Size Check in the Setup menu. If it This printer is designed for use with Epson ink packs. prints beyond the edges of the paper, the inside of the The print quality may decline if any inks other than the printer becomes dirty with ink. - Page 78 SC-F6200 Series/SC-F6000 Series User's Guide Problem Solver Is the roll paper margin set to 15 mm or 35 Widen the bottom margin Depending on the content of the print data, the bottom edge may be scuffed when printing. In this...
-
Page 79: Feeding Or Ejecting Problems
SC-F6200 Series/SC-F6000 Series User's Guide Problem Solver Is paper being handled appropriately? Is the paper suction too strong? If the following points are not observed when If you continue to have problems with ejected paper, handling paper, small amounts of dust and lint may... -
Page 80: Others
“Replacing the Cutter” on page 68 A light is visible inside the printer. This is not a failure. The light is a light inside the printer. The administrator password has been lost. Should you forget the administrator password, contact your dealer or Epson Support. -
Page 81: Appendix
For the latest information, see the Epson Web site. Important: Using ink from an undesignated ink pack may result in a malfunction. Epson shall not be held responsible for any damages or problems with the printer that may occur when using undesignated, non-genuine ink packs. Ink packs... - Page 82 SC-F6200 Series/SC-F6000 Series User's Guide Appendix Product name Product Explanation number Roll Adapter C12C811391 This is the same as the roll adapter supplied with the printer. Waste Ink Bottle T7240 Identical to the Waste Ink Bottle supplied with the printer.
-
Page 83: Supported Paper
SC-F6200 Series/SC-F6000 Series User's Guide Appendix Supported Paper Movement and Transportation This printer supports the following paper specifications. The type and quality of the paper will greatly affect print This section describes how to move or transport the quality. Be sure to use the correct paper for your needs. -
Page 84: How To Transport
SC-F6200 Series/SC-F6000 Series User's Guide Appendix ❏ Perform a nozzle check and check to make sure System Requirements there are no nozzle clogs. “Checking for clogged nozzles” on page 69 Refer to the software RIP manual. ❏ Perform Head Alignment and check the print quality. -
Page 85: Specifications Table
Interface Hi-Speed USB-Compatible with the SC-F6000 Series USB 2.0 Specification. (W) 1608 x (D) 917 x (H) 1128mm 100Base-TX/1000Base-T SC-F6200 Series: 94 kg Weight Rated voltage AC 100 to 240 V SC-F6000 Series: 90 kg Rated frequency 50 to 60Hz... -
Page 86: Standards And Approvals
SC-F6200 Series/SC-F6000 Series User's Guide Appendix Standards and Approvals Safety UL 60950-1 CAN/CSA C22.2 No.60950-1 FCC part 15 subpart B Class A CAN/CSA-CEI/IEC CISPR 22 Class A AS/NZS CISPR 22 Class A Warning: This is a class A product. In a domestic... -
Page 87: Where To Get Help
Support Technical Support Web Before Contacting Epson Site If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting Epson’s Technical Support Web Site provides help with information in your product documentation, contact problems that cannot be solved using the Epson support services for assistance. -
Page 88: Help For Users In North America
Internet Support Help for Users in Australia Visit Epson’s support website at http://epson.com/ Epson Australia wishes to provide you with a high level support and select your product for solutions to of customer service. In addition to your product common problems. You can download drivers and... -
Page 89: Help For Users In Singapore
The more information you ❏ Product usage questions or problems prepare, the faster we can help solve the problem. This information includes your Epson product ❏ Enquiries on repair service and warranty documentation, type of computer, operating system, application programs, and any information you feel is required. -
Page 90: Help For Users In Hong Kong
603-56288222 Internet Home Page ❏ Enquiries on repair services & warranty, product Epson Hong Kong has established a local home page in usage and technical support (Techline) both Chinese and English on the Internet to provide users with the following information:... -
Page 91: Help For Users In The Philippines
- 6PM) Prefix local STD code Help for Users in the Philippines To obtain technical support as well as other after sales services, users are welcome to contact the Epson Philippines Corporation at the telephone and fax numbers and e-mail address below:... -
Page 92: Software License Terms
Program (each is defined in Section 6) until five (5) years after the discontinuation of same model of this printer product. If you desire to receive the source code above, please see the “Contacting Epson Support” in the User’s Guide, and contact the customer support of your region. - Page 93 SC-F6200 Series/SC-F6000 Series User's Guide Software License Terms The list of LGPL Programs: uclibc-0.9.32 libusb-1.0.8 zeroconf 0.6.1-1 iksemel-rev25 e2fsprogs-1.41.14 Apache License This printer product includes the open source software program “Bonjour” which apply the Apache License Version2.0 (“Apache License Program”).
- Page 94 SC-F6200 Series/SC-F6000 Series User's Guide Software License Terms Bonjour This printer product includes the open source software programs which apply the Apple Public Source License Version1.2 or its latest version ("Bonjour Programs"). We provide the source code of the Bonjour Programs pursuant to the Apple Public Source License Version1.2 or its latest version until five (5) years after the discontinuation of same model of this printer product.
- Page 95 SC-F6200 Series/SC-F6000 Series User's Guide Software License Terms 1.8 "Source Code" means the human readable form of a program or other work that is suitable for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an executable (object code).
- Page 96 SC-F6200 Series/SC-F6000 Series User's Guide Software License Terms 2.4 Third Party Rights. You expressly acknowledge and agree that although Apple and each Contributor grants the licenses to their respective portions of the Covered Code set forth herein, no assurances are provided by Apple or any Contributor that the Covered Code does not infringe the patent or other intellectual property rights of any other entity.
- Page 97 SC-F6200 Series/SC-F6000 Series User's Guide Software License Terms 9. LIMITATION OF LIABILITY. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL APPLE OR ANY CONTRIBUTOR BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR RELATING TO THIS LICENSE OR YOUR USE OR INABILITY TO USE THE...
- Page 98 SC-F6200 Series/SC-F6000 Series User's Guide Software License Terms 13.2 Relationship of Parties. This License will not be construed as creating an agency, partnership, joint venture or any other form of legal association between or among You, Apple or any Contributor, and You will not represent to the contrary, whether expressly, by implication, appearance or otherwise.
-
Page 99: Other Software Licenses
SC-F6200 Series/SC-F6000 Series User's Guide Software License Terms Other Software Licenses Info-ZIP copyright and license This is version 2007-Mar-4 of the Info-ZIP license. The definitive version of this document should be available at ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely and a copy at http://www.info-zip.org/pub/infozip/ license.html.