Table of Contents
Advertisement
7 COMBINATION INSTRUMENT
7.15
7.16
7.17
7.18
40
Ride‑Mode display
I00204-13
ABS display
I00204-14
MTC display
I00204-15
Coolant temperature indicator
I00206-01
The Ride Mode (
p. 144) setting is shown in area
play.
The drive mode can be configured in the Ride Mode submenu.
The ABS mode setting is shown in the
When the Ride Mode Rally (
configured in the ABS submenu.
1
The
area of the display indicates whether MTC (
switched on or off.
The motorcycle traction control can be switched on or off in
the MTC submenu.
The coolant temperature is displayed by a symbol. The symbol
changes between LOW, OK and HOT depending on the temperature.
Note
Engine failure Overheating damages the engine.
–
If the coolant temperature warning is displayed, stop imme-
diately and take care not to endanger yourself or other traffic
participants in the process.
–
Allow the engine and cooling system to cool down.
–
Check and, if necessary, correct the coolant level on the cool-
ing system while it is in a cooled state.
1
of the dis-
1
area of the display.
p. 144) is activated, the ABS can be
p. 144) is
Advertisement
Table of Contents
