Setting The Time And Date - KTM 890 ADVENTURE R 2023 Manual

7 COMBINATION INSTRUMENT

7.28.40 Setting the time and date

62
Info
RPM2 can be set in intervals of 500 between 7,000
and 10,000 rpm.
RPM2 must not be smaller than RPM1.
If the engine speed reaches the set value RPM2, the
shift warning light flashes and the color changes.
Condition
The motorcycle is stationary.
–
Press the SET button when the menu is closed.
–
Press UP or DOWN button until Settings appears. Press the
SET button to open the menu.
–
Press the UP or DOWN button until Clock & Date is highlighted.
Press the SET button to open the submenu.
I00245-01
Setting the clock
–
Press the UP or DOWN button until Set Clock is highlighted.
–
Press the SET button to open the menu.
–
Press UP or DOWN button until Hours is highlighted.
–
Press the SET button to open the menu.
–
Press UP or DOWN button until the current hour is set.
Press SET button to select the hour.
–
Press UP or DOWN button until Minutes is highlighted.
–
Press the SET button to open the menu.
I00247-01
–
Press UP or DOWN button until the current minute is set.
Press SET button to select the minute.
–
Press BACK button to exit the menu.
Setting the date
–
Press UP or DOWN button until Set Date is highlighted.
–
Press the SET button to open the menu.
–
Press UP or DOWN button until Day is highlighted.
–
Press the SET button to open the menu.
–
Press UP or DOWN button until the current day is set. Press
SET button to select the day.
–
Press UP or DOWN button until Month is highlighted.
–
Press the SET button to open the menu.
I00249-01
–
Press UP or DOWN button until the current month is set.
Press SET button to select the month.
–
Press UP or DOWN button until Year is highlighted.
–
Press the SET button to open the menu.
–
Press UP or DOWN button until the current year is set.
Press SET button to select the year.
–
Press BACK button to exit the menu.