Table of Contents
Advertisement
Faults
The ABS warning lamp lights
up
High oil consumption
Headlight and position light are
not functioning
Turn signal, brake light, and
horn are not functional
Time is not displayed or not
correctly displayed
12-V battery discharged
The combination instrument
shows nothing in the display
Possible cause
Malfunction in ABS
Engine vent hose bent
Engine oil level too high
Engine oil too thin (low viscosi-
ty)
Fuse 6 is blown
Fuse 5 is blown
Fuse 1 blown
Ignition was not switched off
when vehicle was parked
The 12-V battery is not being
charged by the alternator
Fuse 1 or 2 blown
TROUBLESHOOTING 22
Action
–
Read out the ABS fault memory using
the KTM diagnostics tool.
–
Route the vent hose without bends or
change it if necessary.
–
Check the engine oil level. (
–
Change the engine oil and the oil filter,
clean the oil screens.
(
–
Change the fuses of individual electri-
cal power consumers. (
–
Change the fuses of individual electri-
cal power consumers. (
–
Change the fuses of individual electri-
cal power consumers. (
–
Charge the 12-V battery.
–
Check the charging voltage.
–
Change the fuses of individual electri-
cal power consumers. (
–
Set time and date.
p. 146)
p. 146)
p. 137)
p. 137)
p. 137)
(
p. 133)
p. 137)
155
Advertisement
Table of Contents
