Ride Mode Display; Malfunction Indicator Lamp; Charging Level Indicator - KTM SX-E 3 2023 Owner's Manual

7 MULTIFUNCTIONAL ELEMENT
7.3
7.4
7.5
20

Ride mode display

H03603-01

Malfunction indicator lamp

402136-11

Charging level indicator

402134-10
Red ride mode displays with the numbers 1, 2, or 3 show the ride
mode selected.
Six ride modes are available. The ride modes define how the vehi-
cle will respond to operation of the throttle grip.
The lowest torque is available in ride mode 1. The maximum speed
of the vehicle is limited. This ride mode is suitable for familiariza-
tion.
In ride modes 5 and 6, the full torque is available. The maximum
speed of the vehicle can be utilized. These ride modes should only
be selected once sufficient riding experience has been gained and
the vehicle can be handled safely.
The ride modes between 1 and 5 represent intermediate stages in
terms of torque and maximum speed.
In ride modes 3 and 6, an additional recuperation function
( p. 26) is available.
Ride modes 1 to 3 are indicated by the illuminated single digit.
When ride modes 4, 5, and 6 are activated, the activated ride
mode is displayed as the sum of the illuminated digits.
Info
When the magnetic switch under the seat
not mounted, the ride mode cannot be changed.
The ride modes are switched through in ascending order;
after ride mode 6, the ride mode jumps back to 1.
The warning tones emitted by the multifunctional element are
synchronized with the flashing rhythm of malfunction indicator
1
lamp .
Possible states
The malfunction indicator lamp flashes – There is a
malfunction in the vehicle electronic system.
The malfunction indicator lamp lights up – The sys-
tem is carrying out a self-check or has been disabled
during driving.
1
All segments light up: charging level 70% - 100%.
2
Four segments light up: charging level 50% - 70%.
3
Two segments light up: charging level 30% - 50%.
( p. 17) is