Table of Contents
Advertisement
7 COMBINATION INSTRUMENT
7.15
7.16
7.17
7.18
38
Ride‑Mode display
I00204-13
ABS display
I00204-14
MTC display
I00204-15
Coolant temperature indicator
I00206-01
The Ride Mode (
p. 139) setting is shown in area
play.
The drive mode can be configured in the Ride Mode submenu.
The ABS mode setting is shown in the
When the Ride Mode Rally (
configured in the ABS submenu.
Info
When the ABS mode Road is active, ABS controls both
wheels.
When the Offroad ABS mode is active, ABS only controls
the front wheel. The rear wheel is not controlled by ABS
and may lock during braking maneuvers.
1
The
area of the display indicates whether MTC (
switched on or off.
The motorcycle traction control can be switched on or off in
the MTC submenu.
The coolant temperature is displayed by a symbol. The symbol
changes between LOW, OK and HOT depending on the temperature.
Note
Engine failure Overheating damages the engine.
–
If the coolant temperature warning is displayed, stop imme-
diately and take care not to endanger yourself or other traffic
participants in the process.
–
Allow the engine and cooling system to cool down.
–
Check and, if necessary, correct the coolant level on the cool-
ing system while it is in a cooled state.
1
of the dis-
1
area of the display.
p. 139) is activated, the ABS can be
p. 139) is
Advertisement
Table of Contents
