Menu Sequence And Menu Structure - Riello SC ACS 40 Manual

Hide thumbs

Table Of Contents

Table of Contents

DISPLAY AND PROGRAMMING

Display

The display (1), with full text and graphics mode, is

self-explanatory to all intents and purposes, making the

controller easy to use.

The LED (2) lights up green when a relay is activated.

The LED (2) lights up red when the operating mode is

"Off".

The LED (2) blinks red slowly when the operating mode

is "Manual".

The LED (2) blinks red fast when an error occurs.

Commands are entered using four keys (3) and (4), which

are assigned context-sensitive functions. The "esc" key

(3) is used to cancel a command or exit the current menu.

When changes have been made and are applicable, the

controller will prompt for confirmation to save.

The function of each of the other three keys (4) is shown in

the display line immediately above; the right-hand key is

generally used to confirm and select input data.

Examples of key functions:

+/- = increase/decrease values

▲/▼ = scroll menu up/down

yes/no = confirm/cancel

Info = additional information

Back = return to previous screen

ok = confirm selection

Confirm = confirm setting

Finally, accessing menu 3.2 and selecting "Manual"

mode, the installer can test the various outputs with the

components connected, and verify whether or not the

readings from the sensors are reliable. This done, auto-

matic mode can be re-activated.

Observe the indications for individual parameters

given on the following pages, and check whether or

not further settings are needed for the particular application.