Parameters - Siemens SIMATIC ET 200eco PN M12-L Equipment Manual

EtherNet/IP
6.1 Functions/parameters/address space
6.1.2

Parameters

Parameters
The following table shows the parameters that you can set for each port (each submodule) of
the IO-Link master CM 8xIO-Link + DIQ 8x24VDC M12-L.
Table 6- 1
Parameters
Diagnostics
Diagnostics undervoltage 1L+
Diagnostics: Port
Hardware interrupt (device
notification)
Port configuration
Port configuration without S7-
PCT
Operating mode
Vendor ID**
DeviceID*
Inspection Level/Data
Storage*
Port cycle time*
* Only effective if you use the "IO-Link manual" port mode.
50
Diagnostics and port parameter IO-Link port
Value range
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
• IO-Link autostart
• IO-Link manual
Vendor ID of the
connected IO-Link
device
Device ID of the con-
nected IO-Link device
• Same type (V1.0)
without Back-
up&Restore
• Type compatible
(V1.1) without
Backup&Restore
• Type compatible
(V1.1) with Back-
up&Restore
• Type-compatible
(V1.1) with Re-
store
-
CM 8x IO-Link + DIQ 8x24VDC M12-L 8xM12 (6ES7148-6JJ00-0BB0) communications module
Default Effective range with
configuration soft-
ware, for example,
MFCT
Disable Channel
Disable Channel
Disable Channel
Disable Channel
IO-Link autostart Channel
0 Channel
0 Channel
Type-compatible Channel
(V1.1) with Back-
up&Restore
As short as possible Channel
Equipment Manual, 12/2022, A5E51718265-AB