Siemens SIMATIC ET 200eco PN M12-L Equipment Manual page 25

Wiring
4.2 Pin assignment
Pin assignment of the IO-Link sockets and digital inputs / digital outputs
The table below shows the pin assignments of the 8 sockets for the connection of IO-Link and
digital inputs/digital outputs.
Table 4- 2
Pin
1
2
3
4
5
NOTICE
24 V encoder supply 1U
Use only the 24 V encoder supply 1U
devices/sensors.
24
Pin assignment of the IO-Link sockets and digital inputs / digital outputs
Assignment
X10 to X17 - sockets for IO-Link and digital
inputs / digital outputs
24V encoder supply 1U
s
Input/output signal DIQ : Connector X10
0
Input/output signal DIQ : Connector X11
1
Input/output signal DIQ : Connector X12
2
Input/output signal DIQ : Connector X13
3
Input/output signal DIQ : Connector X14
4
Input/output signal DIQ : Connector X15
5
Input/output signal DIQ : Connector X16
6
Input/output signal DIQ : Connector X17
7
Ground 1M (non-switched)
IO-Link port 1: Connector X10
IO-Link port 2: Connector X11
IO-Link port 3: Connector X12
IO-Link port 4: Connector X13
IO-Link port 5: Connector X14
IO-Link port 6: Connector X15
IO-Link port 7: Connector X16
IO-Link port 8: Connector X17
Not used
s
CM 8x IO-Link + DIQ 8x24VDC M12-L 8xM12 (6ES7148-6JJ00-0BB0) communications module
X10, X12, X14,
provided by the IO link master to supply power to the
s
Equipment Manual, 12/2022, A5E51718265-AB
Front view of the sockets
X11, X13, X15,
X16 X17