Address Space - Siemens SIMATIC ET 200eco PN M12-L Equipment Manual

PROFINET IO
5.1 Parameters/address space
5.1.3

Address space

Introduction
The IO-Link master CM 8xIO-Link + DIQ 8x24VDC M12-L has eight ports. Each port is
represented by a submodule.
IO-Link master and DIQ slot have their own process data areas:
• IO-Link on the first PROFINET slot
• DIQ on the second PROFINET slot
Configuration of the IO-Link ports of the IO-Link master CM 8xIO-Link + DIQ 8x24VDC M12-L
The different operating modes of each IO-Link port are defined by configuring a
corresponding submodule:
• as a digital input by configuring a digital input submodule
– the address space is 1 byte input and the digital input value can be found in bit 0
• as a digital output by configuring a digital output submodule
– The address space is 1 byte output and the digital output value can be found in bit 0
• as IO-Link device by configuring an IO-Link submodule,
• Port disabled:
– in STEP 7 (TIA Portal): By deactivating the port enable.
– with GSD: By plugging in a disabled IO-Link submodule (plugging in the submodule
Die IO-Link ports are preconfigured as 2I + PQI.
When configuring IO-Link submodules, you can select the address spaces for I/O data in the
following byte scales:
• ET 200AL DI 16x24VDC 8xM12
• ET 200AL DI 8x24VDC 8xM8
• ET 200AL DQ 8x24VDC/2A 8xM12
• IO-Link 1 I/1 O + PQI
• IO-Link 2 I + PQI
• IO-Link 2 I/2 O + PQI
• IO-Link 4 I/4 O + PQI
• IO-Link 8 I/8 O + PQI
• IO-Link 16 I/16 O + PQI
• IO-Link 32 I/32 O + PQI
32
(without PQI).
(without PQI).
from the catalog, simply deleting an existing submodule is not sufficient).
CM 8x IO-Link + DIQ 8x24VDC M12-L 8xM12 (6ES7148-6JJ00-0BB0) communications module
Equipment Manual, 12/2022, A5E51718265-AB