Assembling The Machine Head En; Fitting The Machine Head - Dürkopp Adler 888 Instruction Manual

4 Assembling the machine head
4.1

Fitting the machine head

10
–
If the sewing machine is equipped with a direct drive, insert the
machine head (1) vertically in the recess in the table top.
–
If the sewing machine is equipped with a minimotor, tilt the
machine head (2) and insert it in the table top recess.
–
After the head insertion, screw the locking plate (3) immediately to
secure the machine head against falling out at its tilting.
The locking plate is part of the machine head accessories.
1 2
3