Introduction; System Requirements - RME Audio ADI-2 Remote User Manual

1. Introduction

RME's ADI-2 Pro, a true milestone, was released in 2016. Followed by the ADI-2 DAC, ADI-2 Pro
AE (Anniversary Edition), ADI-2 Pro FS, ADI-2 Pro FS R BE and lately the ADI-2/4 Pro SE, RME
has successfully combined usability with flexibility, and brought professional features into the
home and HiFi market.
7 years later RME once again shows what long-term relationship between RME developers and
RME customers means: The newly released ADI-2 Remote for macOS, Windows and iPadOS
not only comes for free, but also supports ALL devices of the ADI-2 series, back to the very first
ADI-2 Pro from 2016!*
The software ADI-2 Remote can be downloaded from RME's website:
Windows: https://www.rme-audio.de/downloads/adi2remote_win.zip
macOS: https://www.rme-audio.de/downloads/adi2remote_mac.zip
iPadOS: available via Apple's App Store as ADI-2 Remote.
Please note the below system requirements, for updated firmware, matching driver and computer
hardware.
* The original ADI-2 AD/DA converter does not have USB or DSP, and as such is not part of this series.

2. System Requirements

Firmware
For the software to communicate with the ADI-2 device, and to support all final features, make
sure you have these latest firmware versions in use:
ADI-2 DAC: USB 80, DSP 59
ADI-2 Pro: USB 266, DSP 122
ADI-2/4 Pro SE (Hw Rev 6): USB 71, DSP 36
ADI-2/4 Pro SE (Hw Rev.7): USB 206 or 208, DSP 36
The latest firmware version comes in a FUT (Firmware Update Tool), download here:
Windows: https://www.rme-audio.de/downloads/fut_madiface_win.zip
macOS: https://www.rme-audio.de/downloads/fut_madiface_mac.zip
Windows
The ADI-2 Remote uses the same graphics engine as DigiCheck NG, so the same system re-
quirements apply: Windows 10 or higher, and a graphics card that supports Direct3D 12. This
might exclude some older computers, even when running Windows 10, for example with Intel
integrated graphics HD4600 and HD4000.
More information on Direct3D and an overview of supported graphics cards is available here:
https://en.wikipedia.org/wiki/Feature_levels_in_Direct3D
For Windows the MADIface series driver 0.9827 or higher is required.
iPadOS
The iPad app requires iOS 12.4 or higher. It therefore can be used with the original iPad Air and
any later (newer) iPad or iPad Pro.
User's Guide ADI-2 Remote – v 1.0
3