Table of Contents
Advertisement
Save
To save the current state click the Save button, then click the desired Setup button. The circle
left to the Setup name will change from white to orange color.
Factory
To load a factory Setup click Load, then Factory. This is an additional, internal and fixed Setup
(unlisted Setup number 10 if you will) that includes typical default settings. The Factory setup
changes all kinds of settings, but does not alter the current EQ or EQ Presets values. Only the
choice of currently active EQ might be changed.
8.5 EQ Presets (PEQ Editor)
8.5.1 EQ Preset Editor
Listen
The EQ Preset Editor gives access to the 20 EQs stored in the device, without overwriting them
immediately after applying changes. In fact the Editor can also be used offline to load, edit and
save EQ Presets.
The button Listen temporarily
loads the current EQ Preset into
the active output.
File – Load
A click on Load brings up a file selection dialog, prefiltered for .adieqpr files.
File – Save
A click on Save brings up a file selection dialog to save the current EQ as .adieqpr file.
Clear
Similar to the Preset Clear within the unit this button sets the EQ to linear or flat frequency re-
sponse.
8.5.2 EQ Presets
Device: Store
Clicking Store the currently active EQ is stored to the device, on the same Preset number.
Device: Re-Load
Any EQ Preset in the device can easily be loaded into the EQ Preset Editor by clicking Re-Load.
This is also helpful to undo any changes that were done in the EQ Preset Editor, but not yet
transferred into the device.
States of EQ Presets
Selecting any of the 20 EQ Pre-
sets the circle left to the Preset
name will change from white to
orange color to signal the cur-
rently active Preset. Any parame-
ter change will let the Preset
number change from white to or-
ange. This serves as indicator
that the current state no longer
equals the stored Preset. Select-
ing a different EQ Preset the or-
ange number will stay visible as a
reminder.
On exit of the app a dialog will ask for confirmation if these changes should be discarded.
User's Guide ADI-2 Remote - v 1.0
18
Advertisement
Table of Contents
