System Requirements ..........4 Brief Description and Characteristics.....4 Technical Specifications ..........4 Overview ..............5 Hardware Installation..........5 Driver and Firmware ..........5 Configuration of the Advanced Remote Control ...6 Miscellaneous Warranty..............8 Appendix ..............8 Declaration of Conformity ........9 Important Safety Instructions To reduce the risk of fire or electric shock do not expose this device to rain or moisture.
• This manual 3. System Requirements The Advanced Remote Control (ARC) can be used with all RME Fireface UCX. It can also be used with all RME Fireface UFX with a serial number 23241707 (built after June 2011) or higher. Upcoming interfaces that feature an Advanced Remote Control connector will also be compatible.
7. Hardware Installation The Advanced Remote Control has a 9-pin Mini-DIN connector at the end of its 5 m long cable. Plug this connector into the corresponding jack, labelled REMOTE, on the back of the UFX or UCX.
9. Configuration of the Advanced Remote Control The Advanced Remote Control is configured via the Key Commands dialog of TotalMix FX, in the Options menu. Note that the ARC does not have any memory, everything is done via and performed within TotalMix FX. The setup of the ARC is stored within the Workspace, and will therefore be identical in all Snapshots of the current Workspace.
Audio AG will not accept claims for damages of any kind, especially consequential damage. Liability is limited to the value of the Advanced Remote Control. The general terms of business drawn up by Audio AG apply at all times.