Bosch MIC-9502 User Manual page 35

MIC IP fusion 9000i
Shutter
Adjusts the electronic shutter speed (AES). Controls the time period for which light is
gathered by the collecting device. The default setting is 1/60 second for NTSC and 1/50 for
PAL cameras. The range of settings is from 1/1 to 1/10000.
Maximum automatic exposure
This limits the integration time when Frame Integration is active. The default is 1/4. The range
of settings is from 1/4 to 1/30.
Top shutter speed
The camera tries to hold this shutter value as long as sufficient ambient light is available in the
scene.
Settings range from 1/60 to 1/10000. The default value is 1/10000 for all modes except
'Motion' (default 1/500).
Backlight compensation
Optimizes the video level for the selected area of the image. Parts outside this area may be
underexposed or overexposed. Select On to optimize the video level for the central area of the
image. The default setting is Off.
High sensitivity
Adjusts the level of intensity or lux within the image. Select from Off or On.
Stabilization
Stabilization reduces camera shake in both the vertical and horizontal axis. The camera
compensates for the movement of the image by up to 2% of the image size. This feature is
ideal for cameras mounted on a pole or mast, or on another location that shakes frequently.
–
–
–
High dynamic range
Select On to activate wide dynamic range, which improves image reproduction in extreme
high-contract scenes.
Select Off to deactivate the feature.
Night mode
Selects night mode (B/W) to enhance lighting in low light scenes. Select from the following
options:
–
–
–
Night mode threshold
Adjusts the level of light at which the camera automatically switches out of night mode (B/W)
operation. Select a value between 10 and 55 (in increments of 5; default 30). The lower the
value, the earlier the camera will switch to color mode.
Night mode priority
Select the option to which the camera should give priority while in night mode:
–
–
Bosch Security Systems
On - Stabilization is always on.
Off - Stabilization is disabled.
Auto - Stabilization activates automatically when the camera detects vibration greater
than the set threshold.
Monochrome: Forces the camera to stay in Nigh Mode and transmit monochrome images.
Color: The camera does not switch to Night Mode regardless of ambient light conditions.
Auto (default): The camera switches out of Night Mode after the ambient light level
reaches a pre-defined threshold.
Motion
Color (default)
User Manual
Camera | en 35
2017.11 | 0.20 | F.01U.349.011