7.3
Connecting Peripheral Devices
Figure 7.1
illustrates connections between the drive, motor, and various peripheral devices.
Refer to peripheral device option manual for detailed installation instructions.
Power
supply
Line
breaker
(MCCB)
or
Leakage
breaker
Magnetic
contactor
(MC)
AC reactor
Zero phase
reactor
Fuse
Input side
noise filter
<1> NOTICE: Do not connect the LAN port on a PC and the comm. port of the RS-232C
Interface Option Unit (SI-232/J and SI-232/JC). Failure to comply may damage the option
unit and the PC. Use the USB Copy Unit with an RJ-45 cable and USB cable as shown in
Figure 7.1
to connect the drive to a PC.
YASKAWA ELECTRIC TOEP C710606 25D YASKAWA AC Drive J1000 Installation & Start-Up Manual
USB Copy Unit
(RJ-45/USB adapter)
RJ-45 cable
(1 m)
<2>
Dedicated Cable
(RJ-45/D-sub adapter)
(30 cm)
Surge
protector
Interface
Option
unit
DC reactor
Ground
+1
+2
R/L1 S/L2 T/L3
Figure 7.1 Connecting Peripheral Devices
7.3 Connecting Peripheral Devices
Engineering software tools
DriveWizardPlus
USB cable
<1>
PC
Drive
B1 B2
Magnetic contactor
(MC)
U/T1 V/T2 W/T3
Output side
noise filter
Backup
Zero phase
reactor
Contactor
Braking
resistor
unit
Motor
Ground
189
7